URETEK methods

Thanks to the modern methods of the URETEK company in Ukraine, soil reinforcement of the base is ensured and structures and structures are aligned with an accuracy of one millimeter. The lifting of structures, as a process, does not depend on the design or actual pressure of the structure and is carried out under the control of ultra-precise equipment, which eliminates the formation of adverse deformations.

LIFTING THE FOUNDATION AND SEALING OF SOILS BY THE DEPTH INJECTION METHOD

DEEP INJECTION technology will help to restore the bearing capacity of the foundation and foundation soils in the shortest possible time without excavation and excavation work. This technology expands the scope of application, both for private houses and for industrial facilities at various stages of construction, as well as during the operation of the facility without stopping production.

If you want to understand the technology in more detail or request documentation, then order a consultation with a geotechnical engineer

DEEP INJECTION

The floor sagged, cracks appeared in the walls and the foundation, or the house gave a roll - this means that the building began to collapse. The reason for this could be: errors in the design, poorly performed construction work, decompression of the soil of the base, etc.

Advantages of the method
1.
All work on DEEP INJECTION technology occurs without noise and dust in the local area of the structure.
2.
The technology is completely environmentally friendly - the materials used do not pollute the environment.
3.
High precision work. The structures are being raised to the design level.

The method consists in the precise introduction of a two-component polymer resin into the soil under pressure. As a result, the base is compacted, voids are filled and moisture is displaced from the pores. Thanks to further point injections of the polymer, the foundation rises to its previous level and its bearing capacity increases.

SLAB LIFTING

The concrete slab of the floor sank or cracked - this situation can occur with improper design, insufficient thickness of the slab, excessive load on it or leaching of the soil.

STABILIZATION AND LIFTING OF PLANE REINFORCED CONCRETE STRUCTURES

SLAB LIFTING technology will stop the subsidence of the slab and raise the structure to the design level, significantly increasing the bearing capacity of the base. This is an ideal solution for carrying out restoration work in warehouses, logistics centers, office buildings, infrastructure facilities - roads and runways of airfields.

If you want to understand the technology in more detail or request documentation, then order a consultation with a geotechnical engineer
Advantages of the method
1.
Carrying out work without stopping the production and work process
2.
The ability to work at any time of the day and at almost any ambient temperature
3.
Work is carried out silently, without dust and earthwork

The technology implies the introduction of a special geopolymer composition under the base plate using thin steel tubes - packers. The expansion of the composition is already in the first minute. As a result, the soil under the base is compacted, and the base itself rises to the design level. The bearing capacity of the base increases.

Address:
Kiev, Berkovetskaya St., 10
Thanks for your comment!
To close

Leave your phone
and our consultant will contact you

Choose a convenient time to call
  • Services
  • Technologies
  • Portfolio
  • Technoblog
  • About us
  • Contacts
  • +8 800 33 65 15
    Uretek